PROCEDURE FOR CLEANING OF AUTO LOADER

1.0 CAUTION
Switch off the electrical mains of the machine.
A PROCEDURE FOR PRODUCT TO PRODUCT CHANGEOVER
1 Dedusting external surfaces.
Use clean nylon brush and wipe with clean dry lint free duster.
2 Dismantling
Remove
a) Back and front cover.
b) Empty capsules hopper.
c) Magazine followed by pusher plate and raceway.
3 Cleaning of parts
Clean the above parts by washing with 0.1% Teepol solution and scrubbing with soft nylon brush. Rinse with jet of potable water followed by rinsing with 5 micron filtered water. Clean loading platform with wet duster. Clean back and empty capsules hoppers using clean dry lint free duster.
4 Drying
The cleaned parts as mentioned in step ( 3 ) are wiped and dried using clean dry lint free duster.
5 Assembling
Reassemble all the parts of the machine carefully checking the correctness of assembling.
NOTE
a) Fix the ‘cleaned’ label.
b) If the cleaned loader is not used within 24 hours after cleaning or there are signs of dust or powder settled on loader, then wipe the body by using a freshly laundered lint free duster.
B PROCEDURE FOR BATCH TO BATCH CHANGEOVER
1 Empty out the hopper.
2 Remove back and front cover.
3 Remove empty capsules from loading platform by brush
4 Dry-clean the loader with clean dry lint free duster.