Objective
To remove any left over adhering powder thereby to avoid cross contamination.
Materials required for cleaning
Cleaning agent : DM water, tap water
Cleaning of equipment : Muslin cloth, nylon brush
Cleaning Procedure
Switch OFF the power supply.
Clean the lid with vessel of the mixer with the jet of tap water.
Thoroughly wipe the outer portion of the machine with clean and dry cloth.
The mixer is rinsed with hot tap water to remove adhered lumps of powder.
Clean inside of the mass mixer with a jet of tap water till all the powder sticking is completely removed. Then use nylon brush for cleaning.
Care should be taken that all the corners of the mixer and loaffles are thoroughly brushed & cleaned.
Remove the water and rinse with fresh hot DM water and dry it by using clean muslin cloth.
After getting approval from QC display “CLEANED” status label.
If the mass mixer is not in use, protect the mixer by covering with polythene bag.
Cleaning Schedule
Before starting manufacturing operation and after completion of the manufacturing operation
Status label
Display “Cleaned and Ready for Use” status label after the completion of cleaning.
No comments:
Post a Comment